The rotary
Blue elephant conk router.
1, Introduction
1): Key for the three jaw chuck 7): Wheel
2): Three jaw chuck 8): Set screw
3): Motor and gear box 9）：Tailstock center
4): Jaw 10）：Locking block
5): Tailstock 11）:Slider
6): liner 12）：Locking block screw.
2, Installing and fixing workpiece
a: loose the 8) Set screw,let the ,let the 9）：Tailstock center free.
b: loose 12)Locking block screw, let the 5): Tailstock free.like the picture .
c: Use 1): Key for the three jaw chuck. let the jaw distance bigger than the workpiece diameter.
Like this .
Then install the workpiece. Clamp the workpiece by the key .
d: Adjust the 5): Tailstock , let 9）：Tailstock center in the center of workpiece.
e: Tight the screw.
Adjust10）：Locking block,Tight Locking block screw,do not let the block move ,then 5): Tailstock
can not move .
f: Adjust the 9）：Tailstock center, do not let the workpiece have space to move.
Tight the 8): Set screw, Tailstock center will not move.
Ok finish.
3, Set workpiece zero point .
Here is an example .
My workpiece look like this .
Move tool to here.
Then ,Control system
Ok .Move z axis up ,give machine a safe distance .
1, load G-code
2, Spindle turn on . let the spindle work first .
3, Cycle start , start work .
Am real example ;
The rotary is parallel to the Y axis。
(if your rotary is parallel to the x axis,just Replace the Y axis with X, Except for the second line.)